Firewad Hicapa MP5 Lower Airsoft

Hello! The highly requested MP5 Lower for Hicapa is here. This kit converts your AAP-01 to an MP5 and lets you use any CYMA MP5 Magazine. A track inside feeds the BBs from the MP5 magazine to the chamber! An HPA setup is not required; this kit also works with regular green gas magazines!

The #1 priority was to make it simple and easy to print and assemble. All parts can fit on smaller printers such as the A1 Mini (18x18x18cm). I've also included the 3MF file, which includes orientation and my Bambu print settings. You can find more information and assembly instructions in my Discord server: https://discord.gg/B5KFRRkb8R. Feel free to ask me any questions there, I'm always happy to chat

Key Features:
- Feeds from AEG MP5 Mags (Use CYMA branded magazines for best results)
- Innovative BB latch design
- Works with green gas and HPA
- Windows to see the BBs feed
- Easy to print and assemble (only 4 printed parts)
- Easy access to the track for cleaning/maintenance

Things that you will need:

Required:
1 x Hi-capa pistol (Designed for TM, but AW, WE, KJW and SSP have been tested and work too)
1 x TM Hi-capa magazine (If you are not using a TM Hi-capa, you must acquire a TM magazine with a high loading hole! These mags are included with TM hicapas, or you can buy them separately -> Example 1: https://www.wgcshop.com/products/tm-mag-hc51 , Example 2: https://shop.jkarmy.com/tokyo-marui-31-rds-magazine-for-tm-hi-capa-5-1-gbbp-series-black-tm096.html)
1 x Spring from pen (roughly 4 x 10mm)
2 x M3 nut
1 x M3x16 Countersunk Screw
1 x M3x20 Countersunk Screw
1 x M2x8 Countersunk Screw
1 x 8 x 8 x 0.8mm Spring

Optional but recommended:
1 x HPA fitting for Marui gas magazine ( Converts your green gas magazine to HPA, I used this one: https://www.aliexpress.com/i/1005006750796503.html

SAFETY DISCLAIMER: Always wear proper face protection when playing airsoft, especially with 3d printed parts! 3d printed parts are more likely to break, so please be careful!

Materials: PLA, PLA+, PETG, ABS, ASA, PLA-CF, ABS-GF, PA-CF
Nozzle Diameter: 0.2mm, 0.4mm, 0.6mm
Layer Height: ≤0.20mm
Wall Loops: 6
Infill: Gyroid 40%

*Recommend in Bold