Firewad Hicapa M4 Lower (3D Files Only)

You can get the files here or on my Cults3D page

I'm very excited to share with you the M4 lower for Hicapa! This kit allows you to use M4 AEG magazines in your Hicapa pistol. A track inside guides the BBs from the M4 magazine to the chamber! You don't need an HPA setup because it also works with green gas mags!

Check out this YouTube Short, which shows it in action: https://www.youtube.com/shorts/EsbnNXlaFaQ

The #1 priority was to make it simple and easy to print and assemble. There are only 4 parts to print, and very little extra hardware is needed. All parts can also fit on smaller printers such as the A1 Mini (18x18x18cm). I've also included the 3MF file, which includes orientation and my Bambu print settings. You can find more information and assembly instructions in my Discord server: https://discord.gg/B5KFRRkb8R. Feel free to ask me any questions there, I'm always happy to chat!

Key Features:
- Feeds from AEG M4 magazines (use PTS magazines for best feeding)
- Innovative BB latch design
- Works with green gas and HPA
- Windows to see the BBs feed
- Easy to print and assemble (only 4 printed parts)
- Easy access to the track for cleaning/maintenance

Things that you will need:

Required:
1 x Hi-capa pistol (Designed for TM, but AW, WE, KJW and SSP have been tested and work too)
1 x TM Hi-capa magazine (If you are not using a TM Hi-capa, you must acquire a TM magazine with a high loading hole! These mags are included with TM hicapas, or you can buy them separately -> Example 1: https://www.wgcshop.com/products/tm-mag-hc51 , Example 2: https://shop.jkarmy.com/tokyo-marui-31-rds-magazine-for-tm-hi-capa-5-1-gbbp-series-black-tm096.html)
1 x Spring from pen (roughly 4 x 10mm)
1 x AEG M4 magazine catch (can also be printed https://www.thingiverse.com/thing:4410603)

Optional but recommended:
1 x M3 nut
1 x M3x16 Countersunk Screw
1 x HPA fitting for Marui gas magazine ( Converts your green gas magazine to HPA, I used this one: https://www.aliexpress.com/i/1005006750796503.html

SAFETY DISCLAIMER: Always wear proper face protection when playing airsoft, especially with 3D printed parts! 3D printed parts are more likely to break, so please be careful!

For personal use only. This file is under the Private Use License

I recommend joining the Discord and reading the instructions in #hicapa-m4-info

Materials: PLA, PLA+, PETG, ABS, ASA, PA-CF
Nozzle Diameter: 0.4mm
Layer Height: 0.16mm
Wall Loops: 4
Infill: Gyroid 35%

*Recommend in Bold

To get the fuzzy texture on the grip, follow these instructions:
1. Import the' Main' and 'Fuzzy Texture Modifer' STL files as "One Object with Multiple Bodies"
2. Change the 'Fuzzy Texture Modifer' STL file type to "Modifier"
3. Enable Fuzzy skin on Grip Texture STL. Set point distance to 0.3mm and thickness to 0.3mm

If you need help, please ask me in the Discord server.